Case Studies
We are pleased to say we are proud off every injection mould tool completed here at P&R.
In this section we demonstrate a selection of our current completed projects and highlight the difficulties and challenges that we overcome to make the part.
We believe that anything is possible and throughout the company we have a "give it a go" attitude that promises you won't get fresher ideas from any other toolmaker or injection moulding company.
We would like to think your project will end up here amongst our Case Studies.
-
Case Study 4
After modelling the part for the customer in just 8 hours a few minor design changes were required before we could progress to tooling.
This part for the roofing market was far from diffic...
-
Case Study 3
The customer having placed orders for extrusion die tooling now required a quick turnaround for this injection mould tool. The part is handed so it had to be designed to accommodate a pick and place r...
-
Case Study 2
This tool had to be produced with the moulder in mind. To prevent unnecessary gassing and in order to deal with the thin wall sections we had to incorporate up and down split lines on several level...
-
Case Study 1
Where do we start with this one! Firstly we had to work with, alter and modify an industrial designers perception of how he saw the part working.
The material choice was crucial in so much...
